Adaptor cable for CCS 24V power supply

Mounting plate for back connecting socket; 18 way; for PY* sockets

Single mounting plate for back connecting sockets

G2RV interface cable for use between CJ1W-ID233/ID262 and 4 P2RV-8-I-F modules; 5m

G2RV interface cable for use between GRT1-OD8(G)-1 and P2RV-8-O-F module; 0.5m

G2RV interface cable for use between NX-OD4256 and P2RV-8-O-F module; 0.5m

G2RV interface cable for use between GRT1-ID8-1 and P2RV-8-I-F module; 0.5m

G2RV interface cable for use between NX-ID4442 and P2RV-8-I-F module; 0.5m

G2RV interface cable for use between GRT1-OD8(G)-1 and P2RV-8-O-F module; 1m

G2RV interface cable for use between NX-OD4256 and P2RV-8-O-F module; 1m

G2RV interface cable for use between GRT1-ID8-1 and P2RV-8-I-F module; 1m

G2RV interface cable for use between NX-ID4442 and P2RV-8-I-F module; 1m

G2RV interface cable with flying leads for use with P2RV-8-O-F or P2RV-8-I-F module; 2m

G2RV interface cable with flying leads for use with P2RV-8-O-F or P2RV-8-I-F module; 5m

Connecting cable for use with P2RV-8-O-F module; 5 m length + flying leads

G2RV plc interface; input type; 8 x G2RV-SL***-AP

Cross connector to reduce wiring; 2-pole; red; order in multiples of 60 (list price is per item)

Cross connector to reduce wiring; 3-pole; red; order in multiples of 60 (list price is per item)

Cross connector to reduce wiring; 20-pole; black; order in multiples of 20 (price is per item)

Cross connector to reduce wiring; 20-pole; red; order in multiples of 20 (price is per item)

Cross connector to reduce wiring; 20-pole; blue; order in multiples of 20 (price is per item)

G2RV separating plate (50/pkt)

Socket; with common; NC & NO terminals at the top and the coil terminals at the bottom - Black

Socket; with common and coil terminals on the bottom and with the NC & NO terminal on the top - Black.

Cross bar AC type

Socket bridge; 2-poles; 19.7 mm length; red; sold in multiples of 50 per package

Socket bridge; 2-poles; 19.7 mm length; blue; sold in multiples of 50 per package

Labels for PYF14-ESN/ESS sockets. (1 pc = 1 bag including 10 labels)

Name plate for P2RF-**-ESS socket (1 pc = 1 bag including 10 plates)

Retaining clip for MY*IN relay & PT/PY socket

Clip and release lever for PYF08S socket

Hold-down clip; for LY relays with buit-in RC-circuit (-CR models); for back-mounting sockets

Metal retaining clip (wire sprig clip) for use with PYF14-ESN/ESS (for use with relays only).Sold in multiples of 10 per package; not available seperately

Socket; back-connecting; 14-pin; solder terminals with hold-down clips

PID box 2x20A outdoor

PID box 2x20A indoor

Socket; LY3 series; back-mounting; PCB terminals

Temp. sensor accessory; compression fitting; R 1/4; dia 4.8; AISI 304

24 VDC control board power supply for 0.1-4 kW

Electrode holder; 3 way

Electrode holder; 5 way

Control unit for CCS lighting; strobe function; in 24Vdc; out 12V/30W

Gateway unit; converts PROFIBUS-DP to Host Link/Compoway-F

ERbic PROFIBUS right-angle connector with integral termination; yellow

ERbic PROFIUS right-angle connector; grey

LED lighting strobe controller; 2 independent channel output; 10A (strobe) / 4A(continuous); 12 - 48VDC

Aluminium pole LU Signal Tower; length 800mm; dia 21;7mm

Aluminium pole LU Signal Tower; length 100mm; dia 21;7mm

Steel pole LU Signal Tower; length 300mm; dia 21;7mm

Polarizing filter for LDL2-119X16 series

Retaining clips for MYA-L*12 relay & PL* sockets

Underwater Electrode with easy mounting and removal. Ideal for applications in deep wells. 50M cable