TWINSAFE-LOGIC, PROTOKOLL TWINSAFE/SAFETY-OVER-ETHERCAT

ETHERCAT BRIDGE TERMINAL

ETHERCAT COUPLER FOR E-BUS TERMINALS

ETHERCAT EXTENSION MODULE

2-KANAL-DIGITAL-AUSGANGSKLEMME 24 V DC, 2 A, 4-LEITERTECHNIK

2-KANAL-ANALOG-EINSPEISEKLEMME 0€¦20 MA, SINGLE-ENDED, 16 BIT

2-KANAL-ANALOG-EINSPEISEKLEMME 4€¦20 MA, SINGLE-ENDED, 16 BIT

MASTER TERMINAL CANOPEN

TWINSAFE-LOGIC-BUSKLEMME MIT 4 DIGITALEN AUSGäNGEN 24 V DC, 0,5 A

4-KANAL-RELAISMODUL 230 V AC, 16 A, POTENZIALFREIE WECHSLER, MIT HANDBEDIENUNG

CONTROL CABINET INDUSTRIAL PC C6920-0000

CONTROL CABINET INDUSTRIAL PC

CONTROL CABINET IND PC INTEL CORE I7 4 CORES

INPUT CARD LAN

INPUT CARD USB

CX1020: INTERFACE MODULE FOR 2 X RS232 CONNECTIONS (COM1 + COM2)

FELDBUSLEITUNG ETHERCAT, PUR, FLEX, M12, STECKER, GERADE, STIFT, 4€‘POLIG, D€‘KODIERT €“ OFFENES ENDE, 5,00 M

MOTOR CABLE ASSEMBLED AT BOTH ENDS FOR SERVO DRIVE AX5000, 4 X 1.5 + 2 X (2 X 0.75 MM²), L=5 M

RESOLVER CABLE, ASSEMBLED AT BOTH ENDS, 4 X 2 X 0,25 MM², L=5 M

PC LINK CARD

POWER SUPPLY TERMINAL .5AMP 5VDC

4-KANAL-ANALOG-AUSGANGSKLEMME 0€¦10 V, 12 BIT

2-KANAL-ANALOG-AUSGANGSKLEMME 0€¦20 MA, 12 BIT

2-KANAL-ANALOG-AUSGANGSKLEMME 0€¦20 MA, 16 BIT

INKREMENTAL-ENCODER-INTERFACE MIT EINFACHEINGäNGEN

TERMINAL AS-INTERFACE MASTER

BUS TERMINAL CONTROLLER ETHERNET TCP/IP

SHIELD TERMINAL, 8 X SHIELD

1-KANAL-ANALOG-AUSGANGSKLEMME 0€¦20 MA, 12 BIT

ADAPTER TERMINAL FOR KL8XXX POWER TERMINALS

ERWEITERUNGS-BOX, INKREMENTAL-ENCODER-INTERFACE MIT KOMPLEMENTäREN EINGäNGEN, 1 MHZ, M23; ANSCHLUSS MIT STECKER M23, 12-POLIG, SCHRAUBBAR

DEVICENET SLAVE INTERFACE MODULE

4-KANAL-DIGITAL-AUSGANGSKLEMME 24 V DC, 2 A MIT VERPOLUNGSSCHUTZ, 2-LEITERTECHNIK

16-KANAL-DIGITAL-EINGANGS-KLEMMENMODUL 24 V DC, FILTER 3,0 MS, OHNE STECKER

16-KANAL-DIGITAL-AUSGANGS-KLEMMENMODUL 24 V DC, 0,5 A, OHNE STECKER

COUPLER BOX 4 DIGITAL INPUTS 24VDC

INTERFACE BOX MODULE RS232 4AMP 24V

CANOPEN SLAVE INTERFACE MODULE

CANOPEN MASTER INTERFACE MODULE

M12, STECKER, METALL, SCHRAUBTECHNIK, GERADE, STIFT, 4€‘POLIG, D€‘KODIERT, 0,25€¦0,75 MM², ÃËœ 5€¦8 MM

M8, KUPPLUNG, KUNSTSTOFF, SCHRAUBTECHNIK, GERADE, BUCHSE, 3-POLIG, 0,14€¦0,5 MM², ÃËœ 4€¦5,5 MM

INKREMENTAL-ENCODER-INTERFACE MIT DIFFERENZEINGäNGEN

KOMPAKT BOX, 1 SINCOS-ENCODER-INTERFACE, 1 VSS, M23; ANSCHLUSS MIT STECKER M23, 12-POLIG, SCHRAUBBAR

INCREMENTAL ENCODER INTERFACE 32 BIT 2-CHANNEL

INKREMENTAL-ENCODER ANSCHLUSSBOX, ALUMINIUMGEHäUSE IP 65, STANDARDAUSFüHRUNG

SENSORLEITUNG, PUR, FLEX, M8, STECKER, GERADE, STIFT, 3-POLIG €“ OFFENES ENDE, 2,00 M

SENSORLEITUNG, PUR, FLEX, M8, STECKER, GERADE, STIFT, 3-POLIG €“ OFFENES ENDE, 10,00 M

SENSORLEITUNG, PUR, FLEX, M12, STECKER, GERADE, STIFT, 4€‘POLIG, A€‘KODIERT €“ M12, KUPPLUNG, GERADE, BUCHSE, 4€‘POLIG, A€‘KODIERT, 1,00 M

POWERLEITUNG, PUR, FLEX, M8, STECKER, GERADE, STIFT, 4€‘POLIG €“ M8, KUPPLUNG, GERADE, BUCHSE, 4€‘POLIG, 0,50 M

POWERLEITUNG, PUR, FLEX, M8, STECKER, GERADE, STIFT, 4€‘POLIG €“ M8, KUPPLUNG, GERADE, BUCHSE, 4€‘POLIG, 1,00 M

POWERLEITUNG, PUR, FLEX, M8, STECKER, GERADE, STIFT, 4€‘POLIG €“ M8, KUPPLUNG, GERADE, BUCHSE, 4€‘POLIG, 2,00 M

POWERLEITUNG, PUR, FLEX, M8, STECKER, GERADE, STIFT, 4€‘POLIG €“ M8, KUPPLUNG, GERADE, BUCHSE, 4€‘POLIG, 0,10 M

CORDSET BUS INTERFACE 5M

FELDBUSLEITUNG ETHERCAT, PUR, FLEX, M12, STECKER, GERADE, STIFT, 4€‘POLIG, D€‘KODIERT €“ RJ45, STECKER, GERADE, STIFT, 8-POLIG, 10,00 M

FELDBUSLEITUNG ETHERCAT, PUR, HIGHFLEX, M12, STECKER, GERADE, STIFT, 4€‘POLIG, D€‘KODIERT €“ RJ45, STECKER, GERADE, STIFT, 8-POLIG, 3,50 M

M12, FLANSCH, GERADE, BUCHSE, 4€‘POLIG, D€‘KODIERT €“ RJ45, KUPPLUNG, GERADE, BUCHSE, 8-POLIG

INDUSTRIAL-ETHERNET/ETHERCAT-PATCHKABEL, CAT5, PUR, 2,00 M, 2,00 M

ERWEITERUNGS-BOX, 8 DIGITALE AUSGäNGE 24 V DC, IMAX = 0,5 A, M12; I/O-ANSCHLUSS MIT STECKER M12, 5-POLIG, SCHRAUBBAR

ERWEITERUNGS-BOX, 8 DIGITALE EINGäNGE 24 V DC, FILTER 0,2 MS, M12; I/O-ANSCHLUSS MIT STECKER M12, 5-POLIG, SCHRAUBBAR

MOTOR CABLE 3M W/FIXED INSTALLATION

MOTOR CABLE W/M23 SPEEDTEC

MOTOR CABLE W/M23 SPEEDTEC

MOTOR CABLE 5METER

MOTOR CABLE 10METER

SCHRITTMOTORKLEMME MIT INKREMENTAL-ENCODER, 50 V DC, 5 A, 2 PHASEN2 DIGITALE EINGäNGE 24 V DC4 DIGITALE EINGäNGE FüR EIN INKREMENTAL-ENCODER-GEBERSYSTEM

SERVO MOTOR IP54 0.32KW 0.48NM 8000RPM 230VAC

SERVO MOTOR IP54 0.32KW 0.48NM 8000RPM 230VAC

SERVO MOTOR 230VAC 24VDC

SERVO MOTOR

SCHRITTMOTORKLEMME 24 V DC, 1,5 A, 2 PHASEN, 2 DIGITALE EINGäNGE 24 V DC

MAGNETIC ENCODER SYSTEM FOR LINEAR SERVOMOTORS AL2XXX (MES)

MAGNET YOKE (LB = 114 MM, WEIGHT 25.5 KG/M)

MAGNET YOKE (LB = 171 MM, WEIGHT 25.5 KG/M)

MAGNET YOKE (LB = 456 MM, WEIGHT 25.5 KG/M)

SERVOMOTOR, 230 V, RESOLVER, MO=0.2 NM, IO=0.93 ARMS, NN=6000 MIN-1

SERVOMOTOR, 230 V, RESOLVER, MO=0.2 NM, IO=0.93 ARMS, NN=6000 MIN-1, PREASSEMBLED CONNECTORS

SERVOMOTOR, 230 V, RESOLVER, MO=0.1 NM, IO=0.6 ARMS, NN=6000 MIN-1

SERVOMOTOR, 230 V, RESOLVER, MO=0.1 NM, IO=0.6 ARMS, NN=6000 MIN-1, PREASSEMBLED CONNECTORS

SERVOMOTOR, 400.480 V, RESOLVER, MO=0.8 NM, IO=0.82 ARMS, NN=4500 MIN-1

SERVOMOTOR, 400.480 V, RESOLVER, MO=0.8 NM, IO=0.82 ARMS, NN=4500 MIN-1, WITH HOLDING BRAKE

SERVOMOTOR, 400.480 V, RESOLVER, MO=0.32 NM, IO=0.8 ARMS, NN=4000 MIN-1

SERVOMOTOR, 400.480 V, RESOLVER, MO=0.32 NM, IO=0.8 ARMS, NN=4000MIN-1, WITH HOLDING BRAKE

SERVOMOTOR, 400.480 V, RESOLVER, MO=1.5 NM, IO=1.6 ARMS, NN=4000 MIN-1

SERVOMOTOR, 400.480 V, RESOLVER, MO=1.5 NM, IO=1.6 ARMS, NN=4000 MIN-1, WITH HOLDING BRAKE

SERVOMOTOR, 400.480 V, RESOLVER, MO=1.0 NM, IO=1.6 ARMS, NN=6000 MIN-1

SERVOMOTOR, 400.480 V, RESOLVER, MO=1.0 NM, IO=1.6 ARMS, NN=6000 MIN-1, WITH HOLDING BRAKE

SERVOMOTOR, 400.480 V, RESOLVER, MO=0.5 NM, IO=1.0 ARMS, NN=6000 MIN-1

SERVOMOTOR, 400.480 V, RESOLVER, MO=0.5 NM, IO=1.0 ARMS, NN=6000 MIN-1, WITH HOLDING BRAKE

SERVOMOTOR, 400.480 V, RESOLVER, MO=3.0 NM, IO=2.3 ARMS, NN=3000 MIN-1

SERVOMOTOR, 400.480 V, RESOLVER, MO=3.0 NM, IO=2.3 ARMS, NN=3000 MIN-1, WITH HOLDING BRAKE

SERVOMOTOR, 400.480 V, RESOLVER, MO=2.5 NM, IO=1.6 ARMS, NN=3000 RPM

SERVOMOTOR, 400.480 V, RESOLVER, MO=2.5 NM, IO=1.6 ARMS, NN=3000 RPM, WITH HOLDING BRAKE

SERVOMOTOR, 400.480 V, RESOLVER, MO=2.6 NM, IO=1.9 ARMS, NN=3000 MIN-1

SERVOMOTOR, 400.480 V, RESOLVER, MO=2.6 NM, IO=1.9 ARMS, NN=3000 MIN-1, WITH HOLDING BRAKE

SERVOMOTOR, 400.480 V, RESOLVER, MO=9.5 NM, IO=6.1 ARMS, NN=3000 MIN-1

SERVOMOTOR, 400.480 V, RESOLVER, MO=9.5 NM, IO=6.1 ARMS, NN=3000 MIN-1, WITH HOLDING BRAKE

SERVOMOTOR, 400.480 V, RESOLVER, MO=8.0 NM, IO=4.3 ARMS, NN=3000 MIN-1

SERVOMOTOR, 400.480 V, RESOLVER, MO=8.0 NM, IO=4.3 ARMS, NN=3000 MIN-1, WITH HOLDING BRAKE

SERVOMOTOR, 400.480 V, RESOLVER, MO=4.6 NM, IO=2.8 ARMS, NN=3000 MIN-1

SERVOMOTOR, 400.480 V, RESOLVER, MO=4.6 NM, IO=2.8 ARMS, NN=3000 MIN-1, WITH HOLDING BRAKE